Getting Down To Basics with

How Frequent a Radiator Should Be Flushed

In order for your vehicle to serve you as long as possible, they demand good and proper maintenance. A radiator is part of a vehicle’s cooling system installed to ensure that the vehicle operates at the right temperature. A combination of two tanks and a core connected by several narrow tubes make up a car radiator. When a vehicle is switched, the coolant moves from one tank to another due to rise in its temperature allowing cooler air that takes the heat out of the coolant to be dragged in through the tubes when the vehicle moves.

To avoid overheating of the engine that might result in breakdown or worse, it is recommended that radiator flushing be done. An engine flush gets rid of the dirt that might mount up in the engine thus compromising the purity of distilled water and antifreeze in the engine. Compromised purity may lead to freezing of some engine parts or rusting if it’s not changed for too long. Allow your vehicle’s engine to cool before you start flushing the radiator.

Flushing a radiator entails getting rid of the dirty coolant and refilling it with a new one but for it to be effective a flushing agent must be used. Dirt particles in the engine can block its parts or cause corrosion hence the need of a flushing agent to remove them. Raise the front of the car with a to carjack ten drain fluid by unscrewing the radiator plug into a bowl placed under the car.

After putting the plug back, fill the engine with distilled water and flushing agent and the engine on and carefully follow instructions obtained with the flushing agent. Get rid of the mixture of distilled water and flushing agent by draining the engine and opening the valves to ensure everything is gotten rid of. If your fresh antifreeze need dilution, use distilled water while following manufacturer’s instruction before filling it in the clean engine. Avoid damage to the engine through localized overheating caused by excess air in the engine system by completely bleeding the system before refilling it with fresh anti-freeze.

Normal temperatures are a good sign after adding the coolant but some air might still be trapped in the system requiring the engine be turned off again. Consulting a vehicle’s manual or dealer you bought from can help you understand how often your vehicle’s radiator needs to be flushed. A once in every five years flushing is a healthy habit for your vehicle but it should not be limited to that because sometime early flushing might be needed like due to the presence of rust around the engine area. Therefore, the standard time a radiator should be flushed is once every few years but it is majorly the info. here. For more info. about car maintenance practices, click here for more.

Cite: Read More Here

You may also like...